Create and Interrogate Clash Results

In Clash Manager you can run clash rules or rule groups to get clash results. The clash results can then be reviewed and interrogated. To open Clash Manager, go to Logic > Clash Manager.

A best practice is to use a master preset to focus on a specific area of the federated discipline models before running a rule to review focused clash results.

Considerations

Admin and Standard users can create coordination rules. Read-only users can also create coordination rules but cannot save any actions to the project.

Steps

Create clash results

  1. In the Clash Manager Rules tab, select a rule or rule group, and then click the Run rule icon.

    The Results tab will open and show the clash results grouped by the primary tag selected in the rule creation.

  2. In the Results tab, select a clash result, and then select a tag in the Select Tag Name drop-down to view additional insight of the clash results.

  3. To view a heatmap of results, click the Clash results settings icon to enable Issued Result and Clash Points.

  4. Click the Select all clash results icon at the top left to group and view additional related clashes to group into a single issue.

  5. Click the Clear the results list icon to clear and deselect clash results.

To view the Rules and Results tab side-by-side, click the Expand icon at the bottom left of the panel.